PowerHD AR-3606HB - Continuous Rotation Servo

Continuous rotation servo at 71 round/minute at 6V

More details

Price and order


16,20 € incl. tax

12 items in stock

Quantity from 1 to 4 from 5 to 9 from 10 to 19 from 20 to +
Price 16,20 € 15,88 € 15,39 € 14,90 €

The AR-3606HB is a standard-sized servo that has been built by Power HD specifically for continuous rotation. At 6 V, it has a maximum rotation speed of 71 RPM (no-load) and can produce up to 93 oz-in (6.7 kg-cm) of torque. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.


The AR-3606HB continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.


The servo has a 12" (300 mm) lead that is terminated with a JR-style connector and includes additional servo horns and mounting hardware. The following picture shows an example of the hardware that might be included (actual hardware could vary):



SpringRC SM-S4303R PowerHD AR-3606HB Parallax (Futaba S148)
Max Speed @ 6 V 54 rpm 71 rpm 50 rpm
Stall torque @ 6 V 71 oz-in 93 oz-in 42 oz-in
Max Speed @ 4.8 V 43 rpm 62 rpm 39 rpm
Stall torque@ 4.8 V 46 oz-in 83 oz-in 33 oz-in
Weight 41 g 40 g 43 g
Size 41.3×20.7×40.2mm 40.5×20.0×38.0mm 40.5×20.0×38.0mm


Visit official webpage for more informations.


Like all our products, this kit is RoHS.

Logo RoHS

No customer comments for the moment.

Only registered users can post a new comment.