Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1

Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1

More details

Price and order

ADA-01904

9,00 € incl. tax

1 item in stock

Quantity from 1 to 4 from 5 to 9 from 10 to +
Price 9,00 € 8,82 € 8,55 €

Simply plug this charger via any MicroUSB cable into a USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.

 

Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the front, for when you'll only be charging batteries with 500mAh size or larger.

 

Mind voltage, chemistry, polarity and pinout.

 

Comes assembled and tested with a free bonus JST cable!

5V input via Micro-B USB connector

For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)

100mA charge current, adjustable to 500mA by soldering a jumper closed

 

Batteries not included.

 

Dimensions: 21mm x 19mm x 2mm / 0.8" x 0.75" x 0.08"

Height w/ JST: 7mm x 0.3"

Weight: 2g

 

Visit official webpage for more informations.

 

Like all our products, this kit is RoHS.

Logo RoHS

No customer comments for the moment.

Only registered users can post a new comment.