PN532 NFC/RFID contrôleur breakout board - v1.6

Version 1.6 du breakout bord du contrôleur PN532 NFC RFID

Plus de détails

prix total

ADA-00364

48,00 € TTC

4 pièces disponibles

Quantité de 1 à 4 de 5 à 9 de 10 à 19 de 20 à 49 de 50 à 99 de 100 à +
Prix 48,00 € 47,04 € 45,60 € 44,16 € 43,92 € 43,44 €

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC.

It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!

NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones

 

Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags)

 

The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer!

 

Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1" header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a Mifare Classic 1K card!

 

Nouveau dans la version 1.3: LED d'alimentation, régulateur 3.3V et connecteur FTDI pour une utilisation avec libnfc.

 

 

Aucun commentaire n'a été publié pour le moment.

Seuls les utilisateurs enregistrés peuvent poster des commentaires.